- Fabric Inspection Machine
- Fabric Folding Machine
- Fabric Cutting Machine
- Beam Stacker
- Digital Counter Meter
- Fabric Relaxing Machine
- Tubular Fabric Reversing Machine
- Tubular Fabric Slitting Machine
- Automatic Tube-Sewing Machine
- Hydraulic Warp Beam Trolley
- Motorized Warp Beam Trolley
- Cloth Roll Trolley
- Warp Beam
- SUNTECH Service
- Fabric Rolling Machine
- Fabric Roll Packing Machine
- Batcher Machine
Does the machine have a guard or shut off switch or sensor ?(ST-WFIM)
1-There is a shut off switch on operation panel (in below red), in case someone puts their hand near the rollers, press the button, the machine will stop running.
2-Normally, the rolling speed is 15m/min, this speed is safe enough, and there is a enough gap between two rewinding rollers, in case someone puts their hand into the rollers,the hand will not be rolled and hurted because of the safety speed and enough gap.
3. We do not suggest you to add the sensor or guard.
3.1)Adding a sensor to induce the anything near the roller, the machine will stop immediately, this idea is perfect, but it's not working actually.
Suppose the operator need to check the roller during machine running or to
adjust the rollers as per the actual condition, the sensor may induce the
operator and stop the machine.
2)If the guard is added on rewinding position, it will be much more complicated
for fabric feeding and fabric roller doffing, the operator may need to bend over all
the time. And the machine price will be much higher.