Home > Products > Machines for Weaving Factory > Beam Storage System >

SUNTECH Computerized Warp Beam Storage Stacker

SUNTECH Computerized Warp Beam Storage Stacker

SUNTECH Computerized Warp Beam Storage Stacker
SUNTECH Computerized Warp Beam Storage StackerSUNTECH Computerized Warp Beam Storage StackerSUNTECH Computerized Warp Beam Storage Stacker
CategoriesBeam Storage System
AlbumView larger image
BrandSuntech
ModelST-BS
TypeBeam Rack
ScaleHeavy Duty
Capacity26-120pcs, 26-120pcs
PLC ControllingJapanese brand
Application RangeWarp beam/Size beam/Weaving beam/Fabric roll
Running Chain Pitch76.2mm or 92mm
Power Supply3-380V/50HZ (can be adjusted)
Warranty13 months from the date of shipment
CertificationCE
After-sales Service ProvidedEngineers available to service machinery overseas
FOB portSHANGHAI
Terms of PaymentL/C, T/T
Update Time2019-12-10
Detail Information
SUNTECH Computerized Warp Beam Storage
The model ST-BS is the best solution for storage of ready warp beam/size beam/weaving beam/ fabric roll, which is widely applicable in the weaving preparation workshop, weaving unit and finishing unit for space utilization and to avoid damage of ready warp/fabric roll. They are available in different models for handling each particular situation. For example, loading and unloading can be undertaken from one position to several positions at one or different level. The model ST-BS could employ a microprocessor-con- trolled information system for storage and retrieval of particular beams.
storage capacity
Type of warp beam
over dimension(mm)
Layer
L
W
H
30
∅800 X model 1900 (L1=2200
930
3000
4300
4
40
12000
50
15000
60
18000
70
21000
80
24000
100
30000
1). Installation Options: Single Exit; Embedded Single Exit; Double Exits, Embedded Double Exits; Vertical 1-2 Layers 

2). Storage Layer: two; four; six, eight layers

3). Storage Capacity: 20 ~120pcs

4) Diameter of Beam or Fabric Roll: 500-1250mm

5) Width of Beam or Fabric Roll, model 1500 model 3900

6). Loading &Unloading: electric hydraulic lift table

7). Enclosed Control Panel with PLC for sequential control of machine 

8). HMI(Touch Panel) for easy and quick access of data and machine operation

9). Automatic Beam Selection based on entered data like beam No/beam code/mill code/etc Machine will select shortest path and bring the selected beam at doffing position 10). Safety controls are interlocked with machine operation.
Sales Director
Mr. Shen
Mr. Shen
leave a message:
Contact Now