Fabrics are often stretched to make them look more appealing. This stretching not only creates wrinkles but also causes the fabric to lose its elasticity. A fabric relaxing machine is a machine that can be used to fix wrinkles problem and make fabrics look new again. A fabric relaxing machine can help with solving the frustration when the fabrics come with wrinkles and tension from a fabric finishing machine. Using a fabric relaxing machine is a great way to get your fabric looking its best without spending a lot of time or money.

FABRIC ROLL

Introduction

A fabric relaxing machine is a giant roller that you put your fabric through. It smooths out wrinkles and creases, is mainly helps to get rid of static cling. You'll be amazed at how much better your fabric looks after they've been through a fabric relaxing machine.

There are a few things to keep in mind when using a fabric relaxing machine. First, make sure that you remember all the operations carefully so that you understand how to use them properly. Second, be sure to use gentle settings if you're working with delicate fabrics. And finally, don't forget to remove any lint or hair from your clothing before putting it in the machine - otherwise, you'll end up with lint-covered fabric!

If you're looking for an easy way to get your fabric looking its best, a fabric relaxing machine is a great option. Just be sure to follow the instructions carefully and use gentle settings on delicate fabrics, and you'll be able to enjoy wrinkle-free clothing in no time.

Types of Fabric Relaxing Machine

1. Tension-less Fabric Relaxing Machine

These machines are used to remove tension from fabric without the use of heat. This is done by passing the fabric through a series of rollers that gradually relax the fibers.

2. SUNTECH Fabric Relaxing Machine

ST-FRM-VI is one of the SUNTECH fabric relaxing machines, which is mainly used to eliminate the tension of knit fabrics, with keeping the fabrics tidy for storage.

ST-FRM-VI SUNTECH FABRIC RELAXING MACHINE

Compared with the traditional roll-to-plaited fabric relaxing way, the ST-FRM-VI fabric relaxing machine provides the best solution to unwind & relax the fabric roll with consistent tension immediately, producing a perfect fabric roll for you.

The special air floating device and tension control system of ST-FRM-VI make the fabric tension be released from roll to roll, which reduces out-of-tolerance cut parts.

3. Heat Setting Machine

Heat Setting machine refers to a kind of fabric relaxing machine that uses heat to set the shape of the fabric and remove any residual moisture. The fabric is passed through a series of heated rollers that cause the fibers to contract and set in their new shape.

4. Calendering Machine

The calendering machine is to smooths out the fabric by passing it through a series of rollers. The amount of pressure and heat applied can be adjusted to achieve the desired results.

Matching with Different Weight & Fabric Types

Different weights and fabric types of garments should be matched with the correct setting on the fabric relaxing machine. Heavier fabrics such as denim or corduroy will require a higher setting, while lighter fabrics such as silk or linen will need a lower setting. If you are unsure of the weight or fabric type of a garment, consult the care label or ask a sales associate for help.

Correct Operation Sequences

1. Check the fabric relaxing machine is properly plugged in and that all cords are secure or not;

2. Fill the tank with water and fabric relaxing solution according to the manufacturer's instructions;

3. Turn on the power switch and set the timer for the desired amount of time;

4. Place the fabric in the fabric relaxing machine and close the lid.

5. Allow the fabric relaxing machine to run until it shuts off automatically.

The Working Process

When it comes to fabric relaxation, there are a few different methods that can be used. The most common and popular method is to use a fabric relaxer machine. This machine uses heat and steam to relax the fabric and make it more pliable.

The working process is relatively simple. First, the fabric is placed into the machine. Then, the machine is turned on and heated up to the appropriate temperature. Once the machine is heated, steam is injected into the chamber where the fabric is located.

The steam relaxation process takes anywhere from a few minutes to an hour, depending on the type of fabric being relaxed. After the relaxation process is complete, the fabric is removed from the machine and allowed to cool down. Once cooled, the fabric will be more pliable and easier to work with.

Specifications

The fabric relaxing machine is a versatile and affordable tool that can be used to release fabric tension. A fabric relaxing machine generally features a steaming wand, an adjustable steam temperature, and a detachable water tank that is also equipped with a lint brush, a crease attachment, and a fabric brush.